(1) Radius: 32m
(2) Specification: Climbling style (floor or shaft)concrete placing
(3) 3 sections foldable arms.
Our concrete placing boom with reliable quality,competitive price
and good after sale service are widely sold in construction
machinery markets abroad.Especially this series of concrete placing
The main important components of HG32 is as below:
1.It includes 3 arms, hydraulic cylinder and four-bar linkage. The
big arm is divided into three segments. The root of the big arm is
connected with the swivel table
2.Swivel table specially designed working platform where hydraulic
pump and electrical control cabinet are set on.
3.Hydraulic control system includes hydraulic pump, manifold valve
block,all kinds of valves, hoses and steel pipes.
4.Tubular column assembly are divided into upper-tubular column and
lower- tubular column. The working platform is fixed on the
5.The climbing device mainly is made up of 3 sets of climbing
frames, 2 hydraulic cylinders and 2 long pins.
This climbing frame support climbing thirough floors and shafts on
site with assigned space.
Delivery pipe dimension (outside diameter × thickness) (mm × mm
Delivery hose dimension (inside diameter × length) (×mm
Radius of placing boom (m)
Stationary height (to the joint between the end of the boom and
Swivel table) (m)
Three hydraulic foldable arms
Slewing range (°)
Power of motor (kW)
Pressure of hydraulic system (MPa)
Type of hydraulic oil
ESSO NUTO H46
Interval of climbing frame (m)
Mode of operation
1. cable remote control
2. radio remote control